Parts, functions and locations

Parts, functions and locations

FUEL GAUGE: is an instrument used to indicate the level of fuel contained in a tank. the gas gauge is at on the main board.

ENGINE: is the machine designed to convert energy into useful mechanical motion. the engine is at forwards of the car.

DRIVE SHAFTS: a rotating shaft that transmits mechanical power from a motor or an engine to a point or region of application. The drive shafts find at the bottom of the engine.

PIPELINE: a conduit of pipe, especially one used for the conveyance of water, gas, or petroleum products. The pipeline be between the engine and drive shafts.

EXHAUST PIPE: a pipe through which gases travel from the exhaust manifold tothe muffler. The exhaust pipe be down of the car.

SILENCER: The tubular device who repress the sound in the exhaust system. The silencer is at the bottom back of the truck.

BRAKE: Device for slowing or stopping motion, of a vehicle. The brake is in the centre of the tire. 

FUEL TANK: is a safe container for flammable fluids. The fuel tank be up from silencer.

PRODUCT COMPARISON

*POWERLOCK EOD 2.0 SCISSORS VS POWERLOCK EOD 2.0 FUZEWELL SPIKE*

powerlock EOD 2.0 fuzewell spike

powerlock EOD 2.0 scissors

1.- The POWERLOCK EOD 2.0 SCISSORS have a scissors and the  POWERLOCK EOD 2.0 FUZEWELL SPIKE not has.

2.- The POWERLOCK EOD 2.0 FUZEWELL SPIKE have a v-cutter and the POWERLOCK EOD 2.0 SCISSORS not has.

3.- The POWERLOCK EOD 2.0 SCISSORS have a saw for wood and the POWERLOCK EOD 2.0 FUZEWELL SPIKE not have.

4.- The POWERLOCK EOD 2.0 FUZEWELL SPIKE have a fuzewell spike and the POWERLOCK EOD SCISSORS not has.

°CONCLUSION°

The multi tool who has scissors is more useful because it has different uses and more tools. And their tools are used with more frequency. 

identifying parts

A.- Front derailleur

B.- Top tube 

C.-  Head tube

D.- Seat angle  E.- Head set

F.- Hub 

G.- bb drop 

 

bicycle

Assemble a bicycle.

1. Install the bush en the part center of ring.

2. Place the tire in place was installed

3. Put the nuts for tightening bushing with the frame, the tire front and rear.

4. Put the bottom bracket 

5. Put the bottom bracket, place the dish together with the rod right and left.

6. Put the chain where it goes,. since this list. adjusts the Slavonic putting the bolt.

7. At the end of the connecting rod. put the pedal according to appropriate her.

8. Put the seat in the part upper of the frames, adjusting with the screw

9. Put the handlebar in the part upper front of the frames

10.Put the brakes front and rear.

assembly bicycle

GLOSSARY

Part	Description	Image
Cranks	1. A device for transmitting rotary motion,  consisting of a handle or arm attached at  right angles to a shaf
Handlebar	the shaped bar used to steer a bicycle
Pedals	A similar foot-operated part attached to  a crank and used for powering various  devices, such as a bicycle.
Clips	Any of various devices for gripping  or holding things together; a clasp or  fastener.
Straps	Such a strip equipped with a buckle or  similar fastener forbinding or securing  objects.
Nuts	any of various devices or  ornaments resembling a nut.
Wheels	A solid disk or a rigid circular ring connected  by spokes to a hub,designed to turn around an  axle passed through the center.
Rims	A circular metal structure around which a  wheel tire isfitted.
Hubs	the central part of a wheel, as that part into which the spokes are inserted.
Chain	a series of objects connected one after the other, usually in the form of a series of metal rings passing through one another, used either for various purposes requiring a flexible tie with high tensile strength, as for hauling, supporting, or confining, or in various ornamental and decorative forms.
Seatpost	The seat post is the component that attaches the frame to the seat.
Seat	Algo, tales como una silla o banco, que puede ser sentado en.
Cog	One of a series of teeth, as on the rim of a wheel or gear, whose engagement transmits successive motive force to a corresponding wheel or gear.
Lockring	washer that prevents a nut from loosening
Stem	the circular rod in some locks about which the key fits and rotates.
Grips	the act of grasping; a seizing and holding fast; firm grasp.
Bottom bracket	connects the crankset (chainset) to the bicycle and allows the crankset to rotate freely.

SYMBOLS

[ ] square bracket = lock series of characters

( ) brackets = for group expressions

{ } keys = mark the beginning and ending of one sentence compound

, comma = for separate the elements from one list

; point and comma = is the sign of ending of sentence

http://quizlet.com/46701256/test

http://quizlet.com/46701256/learn

i have learn¡¡¡¡¡

Integrated Project
Team number		# 6
Group Members		1. Nava Gómez Gerardo Fermin 2. Ortega Natera Leonel Adolfo 3. Salinas García Ivan  4. Gutierrez Farias Jose Ociel 5. Esparza Diaz Sebastian 6. Barrera Verdín Mizraim
My responsabilities are, the investigate and helping to me classmate.
lone assist in investigate information for the slide and i go to help to explain.
Scope
one home automation can make his function automatically, with one buttom
Communication strategies
network social, telephone, page web, between other.